ติดต่อสามถามข้อมูลเพิ่มเติม
รับคำปรึกษาจากทีมงานเราได้ง่าย ทีมงานเรายินดีให้คำปรึกษา และจะติดต่อกลับโดยเร็วที่สุด..
-
2-PCS Ball Valve
- Size：1/2″-4″,DN10-DN100
- Material：CF8/304，CF8M/316
- Strength Pressure：1000WOG,2000WOG
- Sealing Pressure：1.6Mpa
- Applicable Temperature：-40℃-180℃
- Connection Mode：BSP/BSTP/NPT,Butt / Socket Weld
-
3 piece butterfly valve
- SIZE: 1/2″-12″, DN10-DN300
- Material: 304/316L, 1.4301/1.4404
- Pressure: 10bar
- Temperature: 130 ° C
- Connection method: welding, thread, clamp, three-piece flange
- Executive Standard: DIN SMS ISO IDF RJT DS
-
3-PCS Ball Valve
- Size：1/2″-4″,DN10-DN100
- Material：CF8/304，CF8M/316
- Strength Pressure：1000WOG,2000WOG
- Sealing Pressure：1.6Mpa
- Applicable Temperature：-40℃-180℃
- Connection Mode：BSP/BSTP/NPT,Butt / Socket Weld
-
Appearance & internal non retention ball valve
- Size: 1/2″-4″, DN10-DN100
- Temperature: -30 to 150 ° C
- Pressure: 10bar
- Material: 304/1.4301, 316L/1.4404
- Surface: Ra≤0.5μm
- Manual, pneumatic, electric interchange
- Disassemble the valve dimension without disassembling the pipe
- Low steering torque
- Washers according to FDA 177.1550
- Connection: clamp, welding, thread, DIN, SMS, ISO, IDF, BPE, RJT
- The valve body can be replaced regardless of the connection method.
- Certification: 3-A-68-00, PED/97/23/EC
-
Ball valve with thermal insulation jacket
- Size：1″-4″,DN25-DN100
- Temperature：-20℃ – 120℃
- Pressure：10-bar
- Material：AISI 304 316L
- Gaskets:PTFE FDA 177.1550
- No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
- Whatever the connection is, it does not change the total length of the valve
- Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
- Material contact parts AISI 304/316L
- Other parts AISI 304
- Certificate：PED，97/23EC
-
Butterfly type ball valve
- Size：1″-4″,DN25-DN100
- Material ：304/1.4301，316L/1.4404
- Max. temperature：-30℃ – 130℃
- Max. pressure: Vacuum to 10bar
- Small torquemoment
- Excretable(Washable CIP) (option)
- Handle can be installed on the side of the valve body, no matter what the flow direction is.
- Valve body can be replaced in any connections. And the length will not change.
-
Butterfly Valve With Locking Handle
- Size: DN10 to DN300, 1/2″-12″
- Maximum Temperature: 150 ℃
- Maximum Pressure: 10bar
- Material: ASTM T304 / T316L, 1.4301 / 1.4404
- Connection: Thread, Flange Welding, Clamp
- Operation Standard: DIN SMS RJT 3A ISO IDF
- Manual operation: Muti-handles, Pull handles
- Certificate: PED / 97/23 / EC, health wading license
-
Butterfly Valve with pull handle
- Size: 1/2″- 12″, DN10-DN300
- Material: 304 / 316L, 1.4301 / 1.4404
- Pressure: 10bar
- Temperature: 130 ℃
- Connection: weld, thread, clamp, three flange
- Operation Standard: DIN SMS ISO IDF RJT DS
-
CEJN Filter
- Efficiently removes any airborne solids or moisture
- Manual/Semi-automatic drain as standard
- Easy replacement of filter element
-
CEJN Filter/Regulator
- Removes water/moisture efficiently
- High flow capacity at low pressure drop
- Easy replacement of filter element
-
CEJN Lubricator
- Reliable lubrication
- Refillable under pressure
- Lubricates even at very low flow
-
CEJN Regulator
- Rolling diaphragm for extended service life
- High flow with low pressure drop
- Accurate pressure regulation
-
Check Valve
- Size: DN8-DN50,1/2″-2″
- Material：CF8/304，CF8M/316
- Nominal pressure：PN1.6，2.5，4.0，6.4MPa
- Strength test pressure：PN2.4，3.8，6.0，9.6MPa
- High pressure seal pressure test：1.8，2.8，4.4，7.1MPa
- Applicable medium：H1 H-(16-64)C Water, oil, gas
- Applicable temperature：-40~180℃
-
Check valve with clamp end
- Specifications: DN-25/1″ TO DN-100/4″
- Boby/shaft: AISI 316L/304
- Spring: AISI 304
- Seal: EPDM according to FDA177.2600
- Surface Treatment: Ra ≤0.8 μm
- Seal:NBR, FPM (Viton) or PTFE. FDA 177.2600(optional)
- Connections: weld, thread, clamp, DIN, SMS, RJT, IDF, ISO,3A
- Max. pressure：10 bar
- Opening pressure：0.3bar(DN-25)0.2bar(DN-32/40)0.1bar(DN-50/100)
- Working temperature ： -10℃ to 130℃(EPDM)
-
Clamp end butterfly Valve
- Size: DN10-DN300, 1/2″-12″
- Temperature: 130 ℃
- Pressure: 10bar
- Material: ASTM T304 / T316L, 1.4301 / 1.4404
- Connection: Thread, Flange Welding, Clamp, etc.
- Operation Standard: DIN SMS RJT 3A ISO IDF
- Manual operation: Muti-handles, Pull handles
- Certificate: PED / 97/23 / EC, health wading license
- Pneumatic Operation: Single acting, Double acting, Triple action
-
Clamp non-retention ball valve
- Size：1/2″-3″,DN10-DN80
- Material：304/1.4301,316L/1.4404
- Surface：Ra≤0.5μm
- Temperature：-30℃ – 150℃
- Pressure：10bar
- Valve combination clamp connection
- Without professional tools that disassembling the valve
- Small operating torque
- Gaskets:FDA 177.2600
- Connection : Clamp, weld, thread, DIN、SMS、ISO、IDF、BPE、RJT
- No matter what the connection mode is, the valve body can be replaced without changing the length of valve
-
Defender™ FEL-B Area
20W / 40W / 50W / 60W
Features / Advantages
- Instant illumination and restrike no warm-up time required
- Wide power range from 20W to 60W
- High luminous efficacy-Up to 130 Lm/W
- Universal Voltage: AC100-270V (50/60Hz)
- Optional lighting distribution 25°, 60°, 110°
- Anti-corrosion aluminum housing tested 1000hrs to standard ASTM”B117-11”(Marine reinforced ver. available upon request)
- All exposed fasteners with quality stainless steel 316
- Robust design rated with IP66 / IK08 / 5G
-
Defender™ FEL-B Flood
80W / 100W / 150W
Features / Advantages
- Instant illumination and restrike no warm-up time required
- Wide power range from 80W to 150W
- High luminous efficacy-Up to 130 Lm/W
- Universal Voltage: AC100-270V (50/60Hz)
- Optional lighting distribution 25°, 60°, 110°
- Anti-corrosion aluminum housing tested 1000hrs to standard ASTM”B117-11”
(Marine reinforced ver. available upon request) - All exposed fasteners with quality stainless steel 316
- Robust design rated with IP66 / IK08 / 5G
-
Defender™ FEL-B High Bay
80W / 100W / 120W / 150W
Features / Advantages
- Instant illumination and restrike no warm-up time required
- Wide power range from 80W to 150W
- High luminous efficacy-Up to 130 Lm/W
- Universal Voltage: AC100-270V (50/60Hz)
- Optional lighting distribution 25°, 60°, 110°
- Anti-corrosion aluminum housing tested 1000hrs to standard ASTM”B117-11”
(Marine reinforced ver. available upon request) - All exposed fasteners with quality stainless steel 316
- Robust design rated with IP66 / IK08 / 5G
-
Defender™ FEL-B Low Bay
20W / 40W / 50W / 60W
Features / Advantages
- Instant illumination and restrike no warm-up time required
- Wide power range from 20W to 60W
- High luminous efficacy-Up to 120 Lm/W
- Universal Voltage: AC100-270V (50/60Hz)
- Optional lighting distribution 25°, 60°, 110°
- Anti-corrosion aluminum housing tested 1000hrs to standard ASTM”B117-11” (Marine reinforced ver. available upon request)
- All exposed fasteners with quality stainless steel 316
- Robust design rated with IP66 / IK08 / 5G
-
Defender™ FEL-C Flood
80W / 100W / 150W
Features / Advantages
- Best-in-class system efficacy – Up to 130 Lm / W
- Universal Voltage: AC120-277, 347-480V (50/60Hz)
- Instant illumination and restrike – no warm-up time required
- Safe and reliable heat transfer
- Shock-and vibration-resistant – Durable LEDs with solder-less board connection
- Copper-free aluminum body and frame -corrosion resistant
- All exposed fasteners with quality stainless steel
- High Temperature silicone gasketing
- Thermal shock and impact resistant glass lens
- Harsh & Hazardous Duty
-
Defender™ FEL-C Flood
80W / 100W / 150W
Features / Advantages
- Best-in-class system efficacy – Up to 130 Lm / W
- Universal Voltage: AC120-277, 347-480V (50/60Hz)
- Instant illumination and restrike – no warm-up time required
- Safe and reliable heat transfer – Offering a T-rating of T6 ( CID1 )/T4A ( CID2, CIID2 )
- Shock-and vibration-resistant – Durable LEDs with solder-less board connection
- Copper-free aluminum body and frame -corrosion resistant
- All exposed fasteners with quality stainless steel
- High Temperature silicone gasketing
- Thermal shock and impact resistant glass lens
- Harsh & Hazardous Duty
-
Defender™ FEL-C High Bay
80W / 100W / 150W
Features / Advantages
- Best-in-class system efficacy – Up to 130 Lm / W
- Universal Voltage: AC120-277, 347-480V (50/60Hz)
- Instant illumination and restrike – no warm-up time required
- Safe and reliable heat transfer – Offering a T-rating of T6 ( CID1 )/T4A ( CID2, CIID2 )
- Shock-and vibration-resistant – Durable LEDs with solder-less board connection
- Copper-free aluminum body and frame -corrosion resistant
- All exposed fasteners with quality stainless steel
- High Temperature silicone gasketing
- Thermal shock and impact resistant glass lens
- Harsh & Hazardous Duty
-
Defender™ FEL-C High Bay
80W / 100W / 150W
Features / Advantages
- Best-in-class system efficacy – Up to 130 Lm / W
- Universal Voltage: AC120-277, 347-480V (50/60Hz)
- Instant illumination and restrike – no warm-up time required
- Safe and reliable heat transfer
- Shock-and vibration-resistant – Durable LEDs with solder-less board connection
- Copper-free aluminum body and frame -corrosion resistant
- All exposed fasteners with quality stainless steel
- High Temperature silicone gasketing
- Thermal shock and impact resistant glass lens
- Harsh & Hazardous Duty