ติดต่อสามถามข้อมูลเพิ่มเติม
รับคำปรึกษาจากทีมงานเราได้ง่าย ทีมงานเรายินดีให้คำปรึกษา และจะติดต่อกลับโดยเร็วที่สุด..
-
OpVEE™ V-Notch Ball Control Valve
Trimteck’s OpVEE Control Valve is the highest performance V-Notch Ball Valve on the market today. Its advanced design features have taken into account the requirements and recommendations of process control engineers and plant personnel from across varying industries: Pulp & Paper, Chemical, Oil & Gas, Power Generation, and others.
-
Pneumatic angle seat valve
- Size: 1/2″-2 1/2″, DN10-DN65
- Material: CF8/304、CF8M/316
- Connection : Clamp,thread,flange,BSP、BSP、NPT,、DIN
- Pneumatically operated:
1）Can be configured to position sensor
2）valve locator (process controller)
3）Valve position Regulator
4）MINI C-TOP Control unit - Manual pneumatic interchangeable
- Working pressure：8bar(standard) 10bar(option)
- Working temperature：120℃(standard) 180℃(option)
-
Pneumatic angle seat valve with control unit
- Size：1/2″-3″,DN10-DN80
- Material：CF8、CF8M
- Connection : Clamp, weld, thread，BSP/BSTP/NPT,DIN,Inch
- Position feedback, Can be viewed on (Green) off (Red)
- Built-in Solenoid valve
- Valve opens– green light
- Valve closes-red light
- The design has inching button (manual design)
- Power Supply：DC 24V ±10%
- Air supply：M5/Φ4
-
Pneumatic angle seat valves with Positioner
- Pneumatic valve positioner is control implementation flow regulating valve(PD) which uses intelligent process controller to realize the position self adjustment and flow (PID) function。
- Size: 1/2″-3″, DN10-DN80
- Material: CF8/304、CF8M/316
- Connection : Clamp,thread,flange,BSP,BSP,NPT,DIN
- Working pressure：8bar(standard) 10bar(Options)
- Working temperature：120℃(standard) 180℃(Options)
- 0/4…20mA to 0…5/10V（standard）
- 0/4…20mA Position feedback output (Options)
- Device NET Device Net bus control (Options)
- Support single self-tuning function
- Protection grade IP67
- Power Supply DC 24V ±10%
- Support manual and automatic operation
-
Pneumatic ball valve with C TOP
- Size：1″-4″,DN25-DN100
- Temperature：-20℃ – 120℃
- Pressure：10-bar
- Material：AISI 304 316L
- Gaskets:PTFE FDA 177.1550
- No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
- Whatever the connection is, it does not change the total length of the valve
- Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
- Material contact partsAISI，304/316L
- Other parts AISI 304
- Certificate：PED，97/23EC
- Power supply：DC 24V±10%
- Single-acting (standard), double acting (option)
- Self-adjusting valves feature feedback
- Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
- SupportsAS-I BUS
- Supports manual and automatic operation
-
Pneumatic Butterfly Valve
- Size: DN10-DN300, 1/2″-12″
- Temperature: 130 ℃
- Pressure: 10bar
- Material: ASTM T304 / T316L, 1.4301 / 1.4404
- Connection: Thread, Flange, Weld, Clamp
- Operation Standard: DIN SMS RJT 3A ISO IDF
- Pneumatic operation: Single acting, Double acting, Three action
- Certificate: PED / 97/23 / EC, health wading license
-
Pneumatic Butterfly Valve with Positioner
- Support: DEVICE NET BUS
- Standard: Single-acting, double-acting (option)
- One-touch auto-tuning function
- Support for manual operation
- Power Supply: DC 24V ± 10%
- Analog Signals: 0/4-20mA, 0-5/ 10V
- Size: 1″-4″, DN25-DN100
- Material: 304 /316L
- Pressure: 10bar
- Temperature: 130 ℃
- Inner Surface Roughness: Ra0.4μm (option)
- Connection: weld, clamp, thread, flange and other standards
-
Pneumatic Butterfly Valve+C-TOP
- Support Bus: AS-I BUS
- Single-acting (standard), Double acting (option)
- One-touch auto-tuning function valve position
- Support for manual operation
- Power supply: DC 24V ± 10%
- Size: 1″-12″, DN10-DN300
- Material: 304 / 316L
- Pressure: 10bar
- Temperature: 130 ℃
- Inner surface roughness: Ra0.4μm (option)
- Connection: Weld, Clamp, Thread, Flange and Other standards
-
Pneumatic Diaphragm Valve
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: -20 ℃ + 150 ℃ (EPDM) -4 ℉ + 302 ℉ (+ 140 ℃ (SIP, 30) 284 ℉)
- Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
- Body Structure: straight, tee, U-tee, tank bottom valve, multi-channel diaphragm
- Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
-
Pneumatic Diaphragm Valve with Control Unit
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: -20 ℃ + 150 ℃ (EPDM) -4 ℉ + 302 ℉ (+ 140 ℃ (SIP, 30) 284 ℉)
- Connection: Clamp, Weld, Thread, 3A BPE DIN SMS IDF ISO
- Valve body structure: straight, tee, U-tee, tank bottom valve, multi-channel diaphragm
- Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
-
Pneumatic straight ball valve
- Size：1″-4″,DN25-DN100
- Temperature：-20℃ – 120℃
- Pressure：10-bar
- Material：AISI 304 316L
- Gaskets:PTFE FDA 177.1550
- No matter what kind of liquid flow is, the handle can be mounted on the side of the valve body
- Whatever the connection is, it does not change the total length of the valve
- Connection : Clamp, weld, thread,flange,DIN、SMS、RJT、FIL
- Material contact partsAISI，304/316L
- Other parts AISI 304
- Certificate：PED，97/23EC
-
Pneumatic tank bottom ball valve
- Size：1″-4″,DN25-DN100
- Material ：304/1.4301，316L/1.4404
- Max. temperature：-30℃ – 130℃
- Max.Pressure：Vacuum -10bar
- Operating torque is small
- Excretable
- No matter what the flow fluid is, the handle can be mounted on the side of the valve body
- No matter what kind of connection is, the valve can be replaced, without change the length of valve
-
Pneumatic Tank Bottom Diaphragm Valves
- Size: 1″-4″, DN25-DN100
- Highest Temperature: -30 ℃ to 150 ℃ (Depending on diaphragm) (Stainless steel actuator)
- Highest Temperature: -30 ℃ to 130 ℃ (Depending on diaphragm) (Plastic actuator)
- Maximum Pressure: Unidirectional (DELTA P = 100%)
- Normally closed rubber 8bar, PTFE 6bar (option)
- Normally closed rubber 6bar, PTFE 4.5bar (standard)
- Normally open and double acting rubber 8bar, PTFE 6bar
- Facelift different actuators can meet higher pressure rating
- Forged Body: 1.4404 / 316L /1.4435 NB2
- Cast body: 1.4404 / 316L
- Connection: Weld, Clamp, Flange, Thread
- Body Structure: 2 channels, 3 channels, etc.
- Diaphragm Material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
-
Powder butterfly valve
- Size: 4”-10”, DN100-DN250
- Connection method: clamp, weld, flange, bottom flange, DIN 3A INCH
- Material: 316L/1.4404/1.4435
- Seal: White SILICON (recommended) Gray FKM (selection)
- Execution mode: manual, pneumatic, electric interchangeable
- Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
- External surface: matte (recommended) bright blasting electropolishing
- Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.
-
Powder tank bottom butterfly valve
- Size: 4”-10”, DN100-DN250
- Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
- Material: 316L/1.4404/1.4435
- Seal: White SILCON (recommended) Gray FKM (selection)
- Execution mode: manual, pneumatic, electric interchangeable
- Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
- External surface: matt (recommended) bright blasting electropolishing
- Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.
-
Pressure Gauge KGB2
Features
Mechanical pressure gauge
- For gaseous and liquid media that are not highly viscous or crystallising and will not attack copper alloy parts
- Pneumatics
- Heating and air-conditioning technology
- Medical engineering
- Class 1.6 according to EN 837-1
- IP55 Protection rating (EN 60529)
-
Pressure Gauge KGB2S
Features
Pressure Gauge KGB2S
Mechanical pressure gauge
- For gaseous and liquid media that are not highly viscous or crystallising and will not attack copper alloy parts
- Pneumatics
- Heating and air-conditioning technology
- Medical engineering
- Class 1.6 according to EN 837-1
- IP55 Protection rating (EN 60529)
-
Pressure Gauge KGB4
Features
Pressure Gauge KGB4
Mechanical pressure gauge
- With liquid-filled case for applications with high dynamic pressure loads or vibrations
- For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive ambience
- Process industry: Chemical/petro-chemical, power stations, mining, on- and offshore, environmental technology, machine building and general plant construction
-
Pressure Gauge KGB4D
Features
Pressure Gauge KGB4D
Mechanical pressure gauge with flanged diaphragm seals
- For aggressive, hot, corrosive, environmentally hazardous or toxic media
- Chemical and petrochemical industries
- Process industry
- Process connection with thread for direct threaded connection
-
Pressure Gauge KGB4S
Features
Pressure Gauge KGB4S
Mechanical pressure gauge
- With liquid-filled case for applications with high dynamic pressure loads or vibrations
- For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive ambience
- Process industry: Chemical/petro-chemical, power stations, mining, on- and offshore, environmental technology, machine building and general plant construction
-
Projoy Control Box
Model : PEFS-24V-C60
Projoy Control Box
คุณสมบัติสินค้า
- มีปุ่มฉุกเฉิน (Emergency Switch) เพื่อให้ความสะดวกในการหยุดการทำงานของระบบ Rapid Shutdown
- รองรับไฟฟ้า AC และมีการแปลงเป็นไฟฟ้า DC 24V เพื่อให้การจ่ายไฟเลี้ยงให้กับระบบ Rapid Shutdown
- สามารถจ่ายไฟเลี้ยง Rapid Shutdown สำหรับรุ่น PEFS-PL80S-11 ได้สูงสุดถึง 60 ตัวและสำหรับรุ่น PEFS-PL80S-21 ได้สูงสุดถึง 30 ตัว
- มีการตัดการทำงานอัตโนมัติเมื่ออุณหภูมิโดยรอบสูงกว่า 85 องศาเซลเซียส เพื่อป้องกันการเกิดอุบัติเหตุและความเสียหาย
- มาพร้อมกับปุ่มฉุกเฉิน (Emergency Switch) เพื่อให้ความสะดวกในการหยุดการทำงานของระบบ Rapid Shutdown เมื่อจำเป็นต้องใช้งาน
ได้รับมาตรฐาน UL3741 , ตามมาตรฐาน วสท.
-
Projoy Control Box
Model : PEFS-24V-C180
Projoy Control Box
คุณสมบัติสินค้า
- มีปุ่มฉุกเฉิน (Emergency Switch) เพื่อให้ความสะดวกในการหยุดการทำงานของระบบ Rapid Shutdown
- รองรับไฟฟ้า AC และมีการแปลงเป็นไฟฟ้า DC 24V เพื่อให้การจ่ายไฟเลี้ยงให้กับระบบ Rapid Shutdown
- สามารถจ่ายไฟเลี้ยง Rapid Shutdown สำหรับรุ่น PEFS-PL80S-11 ได้สูงสุดถึง 60 ตัวและสำหรับรุ่น PEFS-PL80S-21 ได้สูงสุดถึง 30 ตัว
- มีการตัดการทำงานอัตโนมัติเมื่ออุณหภูมิโดยรอบสูงกว่า 85 องศาเซลเซียส เพื่อป้องกันการเกิดอุบัติเหตุและความเสียหาย
- มาพร้อมกับปุ่มฉุกเฉิน (Emergency Switch) เพื่อให้ความสะดวกในการหยุดการทำงานของระบบ Rapid Shutdown เมื่อจำเป็นต้องใช้งาน
ได้รับมาตรฐาน UL3741 , ตามมาตรฐาน วสท.
-
Proportional regulating ball valve
- Signal Input：0/4-20mA，0-5/10V
- Signal feedback output：0/4-20mA，0-5/10V
- Supports bus：DEVICE NET BUS
- Support manual operation
- Single key self-tuning function
- Power Supply：DC 24V ±10%
- Size： 1/2″-4″,DN10-DN100
- Temperature：-30 ℃-150℃
- Pressure：10bar
- Material：304/1.4301,316L/1.4404
- Surface：Ra≤0.5μm
- Gaskets:FDA 177.1550
- Connection : Clamp, weld, thread,DIN，SMS，ISO，IDF，BPE，RJT
- No matter what the connection mode is, the valve body can be replaced
- Certificate：3-A-68-00，PED/97/23/EC