cs-instruments
DS 400 Mobile เป็นเครื่อง Chart Recorder แบบพกพาที่รวมฟังก์ชันแสดงผลกราฟและ Data Logger ในเครื่องเดียว รองรับการต่อเซ็นเซอร์ได้สูงสุด 4 ตัว รวมทั้งเซ็นเซอร์จากผู้ผลิตภายนอกและให้ไฟเลี้ยงสำหรับเซ็นเซอร์ เหมาะสำหรับการตรวจสอบความชื้น (Dew Point), แรงดัน, การไหล และพารามิเตอร์อื่น ๆ ในระบบลมอัดและก๊าซอุตสาหกรรมอย่างมีประสิทธิภาพ
CS Instruments DS 400 Chart Recorder เป็นเครื่องบันทึกข้อมูลแบบกราฟพร้อมหน้าจอกราฟิกขนาด 3.5 นิ้ว ที่รองรับการเชื่อมต่อกับเซ็นเซอร์ต่าง ๆ เช่น เซ็นเซอร์ Dew Point, Pressure, Flow และ Temperature เพื่อนำข้อมูลมาแสดงผล วิเคราะห์ และบันทึกข้อมูลอย่างต่อเนื่อง เหมาะสำหรับการตรวจสอบระบบลมอัดและก๊าซในอุตสาหกรรมต่าง ๆ
CMM 500 Flow Meter คือเครื่องวัดอัตราการไหลระดับ Reference ที่ออกแบบมาเพื่อวัด กำลังผลิตของ Compressor (Compressor Capacity) ได้อย่างแม่นยำสูง เหมาะสำหรับการทำ Energy Audit, การคิด Billing และการตรวจสอบประสิทธิภาพระบบลมอัดในโรงงานอุตสาหกรรม
CS Instruments DS 400 Set เป็นระบบวัด Dew Point แบบติดตั้งถาวร (Stationary) เหมาะสำหรับการควบคุมจุดน้ำค้างในระบบลมอัดและก๊าซอุตสาหกรรม ระบบนี้สามารถเชื่อมต่อกับอุปกรณ์เสริมต่าง ๆ เพื่อเพิ่มประสิทธิภาพการวัดและควบคุม ซึ่งช่วยให้ระบบของคุณทำงานได้มีเสถียรภาพมากยิ่งขึ้น
The measuring range of -80…20°Ctd makes the dew point set DS 52 with alarm the ideal dew point monitor with analogue output 4…20 mA.
The dew point sensor FA 510 is extremely long-term stable and can be installed and removed quickly and easily under pressure by means of the screwable measuring chamber including quick coupling. The dew point set is supplied ready for plug-in, i.e. everything is completely wired. The alarm values can be freely adjusted.
The measuring range of -20…50°Ctd makes the dew point set DS 52 with alarm the ideal dew point monitor with analogue output 4…20 mA.
Compared to DIN EN 737-3 the monograph “Aer medicalis” in the appendix to the European Pharmacopoeia includes essentially altered purity features whereas especially the drastically reduction of the dew point temperature to -46°C atmospheric (this corresponds to 67 ppm V/V) leads to considerable difficulties. The value 67 ppm V/V for water equals the point of condensation at a pressure of 200 bars and a temperature of 11 ºC. This limitation of the water content to the point of condensation is necessary since the condensation of water may cause corrosion damages and furthermore can favor the increase of microbes.
For measurement of all humidity parameters under pressure up to 16 bar.
The portable dew point meter with integrated, rechargeable battery has been developed especially for the eld use. Besides a highly precise dew point sensor the device also contains a precise pressure sensor up to 16 bar. So in addition to the dew point in °Ctd, the temperature in °C and the line pressure in bar also further moisture parameters (% RH, mg/m3, g/m3) as well as pressure-dependent measuring values (g/kg, ppm v/v, atm. dew point °C) can be calculated.
CS Instruments DP 500 เป็นเครื่องมือวัด Dew Point แบบพกพาที่ออกแบบมาเพื่อการตรวจวัดความชื้นในระบบลมอัดและก๊าซ เหมาะสำหรับการใช้งานภาคสนามและในโรงงาน ช่วยให้คุณสามารถตรวจสอบจุดน้ำค้างได้อย่างแม่นยำและรวดเร็ว
DP 510 Portable Dew Point Meter จาก CS Instruments เป็นเครื่องมือวัด Dew Point แบบพกพา รองรับการเชื่อมต่อเซ็นเซอร์จากผู้ผลิตอื่น (Third Party Sensor) ช่วยให้ผู้ใช้งานสามารถตรวจสอบค่าจุดน้ำค้างในระบบลมอัดและก๊าซได้อย่างแม่นยำ เหมาะสำหรับงาน Service, Maintenance และ Commissioning
DS 400 Flow Measurement จาก CS Instruments เป็นระบบวัดอัตราการไหลและการใช้ลมอัดในโรงงานอุตสาหกรรม ซึ่งช่วยให้สามารถตรวจสอบการใช้พลังงานของระบบ Compressed Air ได้อย่างแม่นยำ พร้อมระบบ Data Logger และหน้าจอแสดงผลแบบ Touch Screen เพื่อวิเคราะห์ข้อมูลการไหลแบบ Real-time
ระบบ DS 400 ประกอบด้วย Flow Sensor รุ่น VA 500 และ Chart Recorder DS 400 ซึ่งสามารถวัดทั้งอัตราการไหล (Flow Rate) และปริมาณการใช้ลมสะสม (Total Consumption) ช่วยให้โรงงานสามารถตรวจจับ Leakage ในระบบลมอัด และเพิ่มประสิทธิภาพการใช้พลังงาน
CS Instruments FA 500 Dew point sensor เป็นเซ็นเซอร์ Dew Point ที่ออกแบบมาเพื่อวัดจุดน้ำค้างในระบบลมอัด, Refrigerator Dryer, Membrane Dryer และ Adsorption Dryer โดยมีหน้าจอแสดงผลในตัวเพื่อแสดงค่าที่วัดได้รวมทั้งฟังก์ชัน Alarm Relay เพื่อแจ้งเตือนเมื่อค่าถึงค่าที่ตั้งไว้ เหมาะสำหรับระบบอุตสาหกรรมที่ต้องการความแม่นยำและตัวเลือกการสื่อสารที่หลากหลาย
CS Instruments FA 510/515 เป็นเซ็นเซอร์ Dew Point รุ่นใหม่สำหรับการวัดจุดน้ำค้างในระบบลมอัดและก๊าซอุตสาหกรรม เหมาะกับการตรวจสอบระบบ adsorption dryers และ refrigeration dryers โดยเฉพาะ สามารถวัดค่าจุดน้ำค้างในช่วง -80…+20 °Ctd และ -20…+50 °Ctd พร้อมสัญญาณ output 4–20 mA และ Modbus RTU รองรับการใช้งานที่หลากหลายและมีความเสถียรสูง
CS Instruments FA 510/515 – Dew Point Sensor เป็นเซ็นเซอร์วัด Dew Point ที่ออกแบบมาสำหรับติดตั้งกับ refrigeration dryers และระบบลมอัด ช่วงการวัด Dew Point อยู่ระหว่าง -20…+50 °Ctd พร้อมทั้งมีความแม่นยำสูง เหมาะกับการตรวจสอบ moisture residual หลัง dryer และระบบผลิตของอุตสาหกรรมต่าง ๆ
CS Instruments FA 550 – Dew Point Sensor เป็นเซ็นเซอร์วัดจุดน้ำค้าง (Dew Point Sensor) ที่ออกแบบสำหรับการใช้งานในสภาพแวดล้อมอุตสาหกรรม Housing ผลิตจากอลูมิเนียมหล่อแข็งแรง กันน้ำกันฝุ่นระดับ IP67 พร้อมฟังก์ชันการเชื่อมต่อ 4–20 mA, Modbus-RTU และ Ethernet (option) ช่วยให้การวัดความชื้นในลมอัดและก๊าซมีความแม่นยำสูงและติดตั้งได้ในทุกสภาวะ
FA 505 – Dew point sensor for OEM applications เป็นเซ็นเซอร์ Dew Point สำหรับใช้งานในระบบ OEM ออกแบบมาเพื่อวัด residual moisture หรือจุดน้ำค้างในระบบลมอัดและก๊าซอุตสาหกรรม ช่วงวัดค่ากว้างและมีความเสถียรของสัญญาณยาวนาน เหมาะกับการติดตั้งในระบบผลิตหรือ drying systems ที่มีพื้นที่จำกัด :contentReference[oaicite:2]{index=2}
No products in the cart.