@202 – All Right Reserved. Designed and Developed by Enlarge
-
Mix proof Butterfly Valve Type A
- Size: DN25-DN100, 1″- 4″
- Material: 1.4404 / 1.4301, 304/ 316L
- Maximum Temperature: -10 ℃ – 130 ℃
- Maximum Pressure: 10bar
- Operation: Pneumatic/ Manual interchangeable
- Control Box: C-TOP Basic type, C-TOP + AS-I communication
- Seal: EPDM (standard) FPM / SILICON / NBR, FDA177.2600
-
Mix proof Butterfly Valve type B
- Size: DN25-DN100, 1″- 4″
- Material: 1.4404 / 1.4301,304 / 316L
- Maximum Temperature: -10 ℃ – 130 ℃
- Maximum Pressure: 10bar
- Operation: Pneumatic/ Manual interchangeable
- Control Box: C-TOP Basic type, C-TOP + AS-I communication
- Seal: EPDM (standard) FPM / SILICON / NBR, FDA177.2600
- Both sides of the valve body are interchangeable (no matter what connection)
- Contact With Material: AISI 316L / 1.4404
- Connection: SMS, RJT, DIN, 3A, ISO
-
Mixproof tank bottom valve
- Size: DN40-1.1/2″to DN100-4″
- The valve is equipped with a normally closed pneumatic actuator
- Forged ball of the valve body
- If there is a gush of fluid leaks from bottom of valve tube, you can determine whether the seal is damaged
- Easy to remove( just removing the clamps is enough)
- Welded connection (mm or inch)
- Balance Protection Design
- Max.Operating Pressure：10bar
- Min.Operating Pressure：Absolute vacuum
- Working temperature：-10℃ – 130℃(140℃ For short periods or disinfection)
- Certificate：3-A-85-03，PED/97/23/EC,FDA177.2600
-
Mixproof valve / double seat valve
- Size：DN40-1.1/2″ to DN100-4″
- Material：ASTM 316L,1.4404
- Pressure：10bar
- Temperature：130℃
- Gaskets：EPDM,FPM,FDA177.2600
- Surface finish：Ra≤0.8μm
- Air supply：5-7bar
- Certificate：3-A-85-03，PED/97/23/EC,FDA177.2600
- Power Supply ：DC 24V±10%
- Single-acting (standard), double acting (option)
- Self-adjusting valves feature feedback
- Supports analog signal (4-20mA) & amp; electrical signal (DC24V) Output
- Support AS-I BUS
- Supports manual and automatic operation
-
Mixproof valve / double seat valve 2
- Size:DN40-1.1/2″to DN100-4″
- The valve is equipped with a normally closed pneumatic actuator
- Forged ball valve body
- If there is a gush of fluid leaks from bottom of valve tube, you can determine whether the seal is damaged
- Easy to remove( just removing the clamps is enough)
- Welded connection (mm or inch)
- Balance Protection Design
- Max.Operating Pressure：10bar
- Min.Operating Pressure：Absolute vacuum
- Working temperature：-10℃ – 130℃(140℃ For short periods or disinfection)
- Certificate：3-A-85-03，PED/97/23/EC,FDA177.2600
- Compressed air pressure：5bar-7bar
- Gas connection：R1/8″(BSP)
-
Mixproof valve manifold
- Size：1.5″-DN40 to 4″-DN100
- Manifold：from 4 up to 48 valves
- Temperature：130℃
- Pressure：10bar
- Air supply：5-7bar
- With a simple C-TOP on every pneumatic actuator (solenoids and sensors)
- With a C-TOP of AS-I field bus
- Without C-TOP, solenoids are installed in the control panel and sensors on the pneumatic actuator
- PLC control
- The states of the valves can be displayed on the control panel
-
Multi functional high frequency canned diaphragm valve
- Size: 1/4 “-3/4”, DN6-DN15
- Standard: BPE 3A DIN ISO IDF
- Certification: PED/97/23/EC, 3A/54-04/1580, FDA.177.2600
- Maximum temperature: -30 ℃ to 150 ℃ (depending on the sealing material) (stainless steel actuator)
- Maximum temperature: -30 ℃ to 130 ℃ (depending on the sealing material) (plastic actuator)
- Maximum pressure: one direction (DELTA P=100%)
Normally closed rubber 8bar, PTFE 6bar (optional)
Normally closed rubber 6bar, PTFE 4.5bar (standard)
Normally open and double acting rubber 8bar, PTFE 6bar - Replacement of different actuators can meet higher pressure levels
- Forged valve body: 1.4404/316L/1.4435 BN2
- Casting valve body: 1.4404/316L
- Connection method: welding, clamp, flange, thread
- Operation mode: manual and pneumatic
-
Multi port Diaphragm Valve M-32B
- Size: 1″-2″, DN25-DN50
- Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
- Temperature: -20 ℃ +150 ℃
- Pressure: 10bar
- Inner Surface Treatment: Ra 0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi port Diaphragm Valve M-32E
- Size: 1″-2″,DN25-DN50
- Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
- Temperature: -20℃ +150℃
- Pressure: 10bar
- Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi port Diaphragm Valve M-32H
- Size: 1″-2″, DN25-DN50
- Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
- Temperature: -20 ℃ +150 ℃
- Pressure: 10bar
- Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi port Diaphragm Valve M-44A
- Size: 1″-2″, DN25-DN50
- Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
- Temperature: -20 ℃ +150 ℃
- Pressure: 10bar
- Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi port Diaphragm Valve M-53A
- Size: 1″-2″, DN25-DN50
- Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
- Temperature: -20 ℃ +150 ℃
- Pressure: 10bar
- Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi port Diaphragm Valve M-62A
- Size: 1″-2″, DN25-DN50
- Material: 316L/1.4404，1.4435 NB2 Fe＜0.5%
- Temperature: -20 ℃ +150 ℃
- Pressure: 10bar
- Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi port Diaphragm Valve M-65A
- Size: 1″-2″,DN25-DN50
- Material: 316L/1.4404，1.4435 NB2 Fe＜0.5%
- Temperature: -20 ℃ +150 ℃
- Pressure: 10bar
- Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi port Diaphragm Valve-M-32A
- Size: 1″-2″,DN25-DN50
- Material: 316L/1.4404, 1.4435 NB2 Fe＜0.5%
- Temperature: -20 ℃ +150 ℃
- Pressure: 10bar
- Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
- Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
- Operations: Manual/Pneumatic
- Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor
-
Multi Position Handle Butterfly Valve
- Size: 1/2″- 12″, DN10-DN300
- Material: 304 / 316L, 1.4301 / 1.4404
- Pressure: 10bar
- Temperature: 130 ℃
- Connection: weld, thread, clamp, three flange
- Operation Standard: DIN SMS ISO IDF RJT DS