• High flow accuracy : 0.1% Optional and 0.2% Standard
• Wide medium temperature range – 200 °C to 300 °C (For medium such as liquid nitrogen, oxygen and argon)
• High pressure handling up to 35 MPa in oil, Drilling well and etc
• Multiple parameters measured : Mass Flow, Volume Flow, Density and Temperature

• Medium temperature can be -20 °C ~200 °C
• Integrated vertification,diagnostic function and empty pipe detection.
• Measure forward and reverse direction flows.
• Built-in reference electrodes,no need to connect ground ring.
• Dual frequency excitation and stable zero point.
• Precision coil winding technology,makes magnetic field more uniform.
• High protection grade,IP65.
• No moving parts,no pressure loss.
• High accuracy: ±0.5% of reading,±0.3% and ±0.2% optional,velocity >0.3 m/s.

• Dynamic detect temperature and Pressure data
• Automatic T&P compensation
• Compression factor correction

H— Measuring range
L—Empty distance
B—The top of the blind
E—The minimum distance from the probe to the tank wall

• Ultrasonic Flowmeter Host
• External Clamp Sensor
• Couplant
• Connection Cable for Downstream
• Charger
• Measuring Tape
• Connection Cable for Upstream
• RS232 Cable

• Flow measurement of tap water, demineralised water and chemicals.
• Fuels, marine engine fuel monitoring, vegetable oil, thermal oil and solvents.
• Special models for refrigerants, pharmaceutical fluids, cryogenic fluids,  liquefied gases and high-pressure applications .

the magnetic field around permanent magnet keeps constant also. The magnetic signal will be transmitted in non-contact form by means of the flow Indicator mechanically connected to conical tube. In another word,the indicator is able to detect and process flow value of liquid by magnetic drive system and finally the corresponding flow rate value can be read from the scale on site. Also it can indicate outputs as standard electrical signal (4-20)mA / hart communication protocol.

• Heat measurement.
• Measuring conductivity liquid and Non-conductivity liquid.
• Can measure zero-flow.
• 2 way analogy input could transmit flow,pressure,temperature,pressure etc.
• Instantaneous flow, Total flow, Heat, Positive flow, Negative flow.
• Multi-channel ultrasonic water meter is less sensitive to upstream obstacles such as elbows, pumps or valves, and the reliability of the measurement results is high, even if one channel stops working due to some reasons, the flow meter The measurement can still be continued.

• Small antenna size, easy to install; Non-contact radar, no wear, no pollution.
• Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.
• The two-wire system technology is an excellent substitute for differential pressure instruments, magnetostriction, radio frequency admittance, and magnetic flap instruments.
• Not affected by pressure changes, temperature changes, inert gas, vacuum, soot, steam and other environmental effects.
• HART or RS485 communication protocol, easy calibration,digital LCD display.
• Suitable for high temperature working conditions, up to 200 °C process temperature.

• Aluminium housing, Compact design, light in weight
• LCD display for flow rate and total volume(M3,NM3 selectable)， temperature, pressure etc.
• Integrated temperature/pressure correction (standard)
• Optional for explosion-proof (I.S. or XP)
• Capable for Natural gas，biogas, Compressed air, exhaust gas, oxygen, NO2, CO2, CO, NO, H2, Oil gas, coal gas，coal seam gas, Mixed gases and Artificial gas. (Steam is not workable)

• No moving parts
• Advanced signal processing electronics
• Long-term reliability
• Explosion-proof converter, Multi-flow unit
• Insert rod dia : ø18 mm and ø12 mm optional
• High precision redinforced sensor
• Direct mass flow detection without temperature and pressure compensation

• Accuracy: ± 0.5% F.S
• Precise linear and temperature compensation.
• ZERO and SPAN calibrate available.
• Smaller blind zone.
• PVC probe, acid and alkali resistant, adapt to bad environment.
• IP65 protection grade.
• Application for Storage tank, chute, pool, Wells, drains, metering box, granary level measurement.

• Japan technology with embedded-type sensor,sensor could integrate with temperature.
• Circuit Board: Digital circuit board,anti-vibration and anti-interference.
• Flow converter: Distinctive modular design, amateurs can operate, disassemble and assemble easily, it will avoid accident risks.
• Integral forging, anti-rust, long service life
• Resist high temperature up to 350°C,normal temperature up to 250°C

• High precise Bi-directional measurement upto 32 m/s
• Highly cost effective. No process shutdown, Simplified installation and cost advantage over magnetic flowmeter
• Nominal pipe diameter : 15 mm upto 6000 mm
• High accuracy measurement : ± 1%
• Support SD Card memory

• New Installation or Replace the traditional High Pressure Sodium Lamp, High Pressure Mercury Lamp, and Metal Halide Street Lamps. Etc.
• Perfect Light Distribution Solution：Integrated shell optic lens, enhance the brightness and illumination uniformity.
• High luminous efficiency, >160LM/W
• Voltage fluctuation is ±20%, the brightness and lifetime will not be influenced at all; Over Current, Over Voltage, Over Heat, Thunder Protection

• New Installation or Replace the traditional High Pressure Sodium Lamp, High Pressure Mercury Lamp, and Metal Halide Street Lamps. Etc.
• Perfect Light Distribution Solution：Integrated shell optic lens, enhance the brightness and illumination uniformity.
• High luminous efficiency, >160LM/W
• Voltage fluctuation is ±20%, the brightness and lifetime will not be influenced at all; Over Current, Over Voltage, Over Heat, Thunder Protection