Electric regulating Diaphragm Valve

Electric regulating Diaphragm Valve as torque, stroke, self adaptive function, freely adjusting the direction of opening and closing.

Power: DC24V / AC110V / 220V

Executive Functions:

Switch Type: input and output signals feedback

Adjustment Type: signal input 0-10V, feedback 2-10V

Self-adaptive Valve Setting

Support for manual operation

Support body sensors or objects sensors, activate valve to open or close

Stroke Time: ON to OFF = 90S, 150S

Specification

Size	DN6-DN100, 1/4" to 4"
Body Material	AISI 316L, (EN1.4301/EN1.4404).ASME BPE 316L, or 1.4435-BN2 (316L) Fe＜0.5% Forged Body
Temperature	-20℃ to +150 ℃
Max pressure	145psi (10bar)
Seal	EPDM+PTFE double seal, EPDM, Teflon PTFE, FPM, Silicon
Pipe Joint Systems	DIN SMS RJT 3A ISO IDF
Operation	Manual, pneumatic, electric all interchange
Surface treatment	Ra16-32µin (0.4-0.8µm), Ra 32µin (0.8µm) as default.
Certification	US 3-A, FDA, CE PED/2014/68/EC, Certification
Connection type	Tri-Clover/ Clamp End, Thread End, Butt Weld End

Electric Diaphragm Valve

Donjoy Technology offers a variety of Electric Diaphragm Valves, electrically actuator with on/off type or modulating type, with DC24V, AC220-230V, suit to install two-way or three-way point of use (Zero Static)  diaphragm valves, T-block valves.

DONJOY Electrically Actuated Diaphragm Valve Surface finish:

• Wetted interior:
  – 32 Ra µin (0,81 Ra µm)
  – ASME BPE SF1 20 Ra µin (0,5 um)
  – ASME BPE SF4 15 Ra µin (0,38 um) electropolish
• Exterior: as cast, electropolished

Sanitary Diaphragm Valve Feature:

● Unique seal design, no dead angles
● FDA-approved seat materials: FDA 21 CFR 177.2600, EPDM+PTFE double seal, EPDM, Teflon PTFE, FPM, Silicon
● Sanitary surface finish, available with Ra < 0.4µm or EP (SF1 and SF4).Meet ASME BPE standard
● Manual handle, pneumatic actuator, electric actuator are interchangeable.
● A wide selection of body types for choose from,2 way,3 way U type/T type/Multiport/Tank Bottom
● Certificates: 3A, FDA, PED 2014/68/EU, ISO9001/2008.
● Standards: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
● 100% hydraulic tested / 100% inspected.

Electric actuator

• Actuating force 1500 N or 2500N
• Nominal voltage AC 230 V
• Control Open/close, 3-point
• Stroke 20 mm
• Speed is 150/S