@202 – All Right Reserved. Designed and Developed by Enlarge
-
3 piece butterfly valve
- SIZE: 1/2″-12″, DN10-DN300
- Material: 304/316L, 1.4301/1.4404
- Pressure: 10bar
- Temperature: 130 ° C
- Connection method: welding, thread, clamp, three-piece flange
- Executive Standard: DIN SMS ISO IDF RJT DS
-
Butterfly Valve With Locking Handle
- Size: DN10 to DN300, 1/2″-12″
- Maximum Temperature: 150 ℃
- Maximum Pressure: 10bar
- Material: ASTM T304 / T316L, 1.4301 / 1.4404
- Connection: Thread, Flange Welding, Clamp
- Operation Standard: DIN SMS RJT 3A ISO IDF
- Manual operation: Muti-handles, Pull handles
- Certificate: PED / 97/23 / EC, health wading license
-
Butterfly Valve with pull handle
- Size: 1/2″- 12″, DN10-DN300
- Material: 304 / 316L, 1.4301 / 1.4404
- Pressure: 10bar
- Temperature: 130 ℃
- Connection: weld, thread, clamp, three flange
- Operation Standard: DIN SMS ISO IDF RJT DS
-
Clamp end butterfly Valve
- Size: DN10-DN300, 1/2″-12″
- Temperature: 130 ℃
- Pressure: 10bar
- Material: ASTM T304 / T316L, 1.4301 / 1.4404
- Connection: Thread, Flange Welding, Clamp, etc.
- Operation Standard: DIN SMS RJT 3A ISO IDF
- Manual operation: Muti-handles, Pull handles
- Certificate: PED / 97/23 / EC, health wading license
- Pneumatic Operation: Single acting, Double acting, Triple action
-
Diaphragm Regulating Valve
- Analog input: 0/4-20mA, 0-5/10V
- Power: DC24V ± 10%
- Protection: IP68 rating
- Support for manual operation
- One-touch auto-tuning function
- Size: 1″-4″, DN25-DN100
- Material: 1.4435NB2, 316L, 1, .4404, ASME BPE 316L
- Highest Temperature: -30 ℃ to 150 ℃ (Depending on seal material) (Stainless steel actuators)
- Highest Temperature: -30 ℃ to 130 ℃ (Depending on seal material) (Plastic actuator)
- Maximum Pressure: Unidirectional (DELTA P = 100%)
- Normally closed rubber 8bar, PTFE 6bar (Option)
- Normally closed rubber 6bar, PTFE 4.5bar (Standard)
- Normally open and double acting rubber 8bar, PTFE 6bar
-
Electric Regulating butterfly valve
- Size:1″-8″,DN25-DN200
- Material: 304 / 316L
- Pressure: 10bar
- Temperature: -30 to 130 ℃
- Connection: clamp, thread, weld, three-piece flange
- Standards: DIN SMS ISO IDF RJT
-
Electric regulating Diaphragm Valve
- Power : DC24V / AC110V / 220V
- Executive Functions : Switch Type: input and output signals feedback
- Adjustment Type : signal input 0-10V, feedback 2-10V
- Self-adaptive Valve Setting
- Support for manual operation
- Support body sensors or objects sensors, activate valve to open or close
- Stroke Time: ON to OFF = 90S, 150S
-
Fine Adjustment Butterfly Valve
- Size: 1″-6″, DN25-DN150
- Material: 304 / 316L
- Connection: clamp, weld, thread, etc.
- Certificate: PED / 97/23 / EC, FDA177.2600
-
Horizontal Pneumatic Butterfly Valve
- Size: DN10-DN300, 1/2 -12 “
- Temperature: 130℃
- Pressure: 10bar
- Material: ASTM T304/T316L, 1.4301/1.4404
- Connection: flange, Weld, Clamp, Thread, etc.
- Operation standard: DIN SMS RJT 3A ISO IDF
- Pneumatic Operation: Single action, Double action
- Certificate: PED/97/23/EC, health wading license
-
Horizontal pneumatic non-retention ball valve
- Size： 1/2″-4″,DN10-DN100
- Temperature：-30℃ – 150℃
- pressure：10bar
- Material：304/1.4301,316L/1.4404
- Surface：Ra≤0.5μm
- Gasket:FDA 177.1550
- Connection : Clamp, weld, thread，DIN，SMS，ISO，IDF，BPE，RJT
- Function: switch type, adjustment type, passive contact
- Power supply: DC 24V AC 110V 220V
- The opening and closing time: 10/S-100/S
- Torque: 6N.M to 2000N.M
- Protection: IP67 grade
- Explosion-proof: EX DII BT4 (option)
-
Horizontal pneumatic powder butterfly valve
- Size: 4”-10”, DN100-DN250
- Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH
- Material: 316L/1.4404/1.4435
- Seal: White SILCON (recommended) Gray FKM (selection)
- Execution mode: manual, pneumatic, electric interchangeable
- Surface treatment: Ra 0.6μm (recommended); Ra 0.4μm (selection)
- External surface: matt (recommended) bright blasting electropolishing
- Applicable: vacuum, high temperature 130 ° C, CIP cleaning, SIP sterilization, etc.
-
Manual diaphragm tank bottom valve
- Size: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404,1.4435 NB2 Fe <0.5%
- Temperature: –20 ℃ + 150 ℃
- Connection: Weld, Clamp, Thread, 3A BPE DIN SMS IDF ISO
- Body structure: U type tee + sampling valve; U-type links
- Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Viton)
- Certificate: 3A-54-02 / 1580, PED 97/23 EC, FDA177.2600
-
Manual Diaphragm Valve
- Specifications: 1″-4″, DN25-DN100
- Pressure: 10bar (145 PSI)
- Material: ASTM 316L, 1.4404, 1.4435 NB2 Fe<0.5%
- Temperature: -20 °C +150 °C (EPDM) -4 °F+302 °F (+140 °C (SIP, 30) 284 °F)
- Connection: clamp, welding, thread, 3A BPE DIN SMS IDF ISO
- Valve body structure: straight through, three-way, U-shaped three-way, tank bottom valve, multi-channel diaphragm valve
- Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Vitong)
- Certification: 3A-54-02/1580, PED 97/23 EC, FDA177.2600
-
Mini Manual Diaphragm Valve
- Size: 1/4 “-3/4”, DN6-DN15
- Standard: BPE 3A DIN ISO IDF
- Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600
- Max Temperature: -30 ℃ to 150 ℃ (Depending on seal material)(Stainless steel actuator)
- Max Temperature: -30 ℃ to 130 ℃ (Depending on seal material)(Plastic actuator)
- Max Pressure: One way (DELTA P=100%)
- EPDM8bar, PTFE 6 bar(Option)
- EPDM6bar, PTFE 4.5 bar(Option)
- Double action EPDM 8 bar，PTFE 6 bar
- Assembling different actuators can meet higher pressure rating.
- Forged Body: 1.4404/316L/1.4435 BN2
- Casting the body: 1.4404/316L
- Connection: Clamp, Weld, Thread, Flange
- Operations: Manual and pneumatic
-
Mini Pneumatic Diaphragm Valve
- Size: 1/4″-3/4″，DN6-DN15
- Standard: BPE 3A DIN ISO IDF
- Certificate: PED/97/23/EC，3A/54-04/1580，FDA.177.2600
- Max Temperature: -30 ℃ to 150 ℃ (Depending on seal material)(Stainless steel actuator)
- Max Temperature: -30 ℃ to 130 ℃ (Depending on seal material)(Plastic actuator)
- Max Pressure: One way (DELTA P=100%)
- EPDM 8bar, PTFE 6 bar(Option)
- EPDM 6bar, PTFE 4.5 bar(Option)
- Double action EPDM 8 bar, PTFE 6 bar
- Assembling different actuators can meet higher pressure rating.
- Forged Body: 1.4404/316L/1.4435 BN2
- Casting Body: 1.4404/316L
- Connection: Clamp, Weld, Thread, Flange
- Pneumatic actutors are suitable for body of direct-way, three way, multiport, weld parts, tank bottom valve
-
Mini Three way Diaphragm Valve
- Size: 1/4 “-3/4”, DN6-DN15
- Standard: BPE 3A DIN ISO IDF
- Certificate: PED/97/23/EC, 3A/54-04/1580, FDA.177.2600
- Max Temperature: -30 ℃ to 150 ℃ (Depending on seal material)(Stainless steel actuator)
- Max Temperature: -30 ℃ to 130 ℃ (Depending on seal material)(Plastic actuator)
- Max Pressure: One way (DELTA P=100%)
- EPDM8 bar, PTFE 6 bar(Option)
- EPDM6 bar, PTFE 4.5 bar(Option)
- Double action EPDM 8 bar, PTFE 6 bar
- Assembling different actuators can meet higher pressure rating
- Forged Body: 1.4404/316L/1.4435 BN2
- Cast Body: 1.4404/316L
- Connection: Clamp, Weld, Thread, Flange
- Operations: Manual and pneumatic